Skip to content
09CH09.TXT — GAA

Chapter 09 · 2022–2026

Gate-All-Around, Nanosheets and Backside Power

> If three sides of gate were good, four were better. Gate-all-around transistors stack horizontal sheets of silicon and surround each one with gate, and the wiring that feeds them power is moving to the back of the wafer.

C:\HISTORY\CHAPTERS\09>type SECTION1.TXT

Nanosheets

> Gate-all-around transistors replace the fin with a stack of thin horizontal silicon sheets, separated during fabrication by sacrificial silicon-germanium layers that are later etched away and replaced by gate material. The gate then wraps every sheet completely. Sheet width can be varied, restoring some of the continuous sizing that FinFET took away from designers.

> Samsung began volume production of a 3 nanometre-class gate-all-around process in 2022. Other leading manufacturers moved their 2 nanometre-class processes to nanosheets, with volume ramps in 2025. Angus Mackinnon's account is careful to separate announcements from yields, a distinction his interviews with process engineers taught him to respect.

C:\HISTORY\CHAPTERS\09>type SECTION2.TXT

Power from below

> Backside power delivery moves the power network beneath the transistors, delivered through the thinned back of the wafer, leaving the front-side metal stack for signals. It reduces voltage drop and congestion, and it changes the physical structure of the chip in ways relevant to security: probing, fault injection and imaging from the back side are long-established attack techniques, and a chip whose power rails sit there changes the attacker's map.

> Hybrid bonding and wafer-to-wafer stacking, used first in image sensors and memory, joined these developments, so that by the mid-2020s a leading-edge chip was a multilayer construction rather than a single patterned surface.

C:\HISTORY\CHAPTERS\09>type SECTION3.TXT

Distance from the edge

> Each step at the leading edge has made the most advanced fabs more expensive and fewer in number. The authors draw the obvious contrast with the next chapter: while a handful of sites build nanosheets, open PDKs on mature nodes have made it possible for anyone to design a chip. Trust at the edge depends on both ends of that range.

C:\HISTORY\CHAPTERS\09>type DATES.LOG
2022First volume 3 nm-class gate-all-around production
2024–2025Backside power delivery introduced on leading-edge logic
20252 nm-class nanosheet processes ramp
C:\HISTORY\CHAPTERS\09>type STANDARDS.LST
  • Gate-all-around
  • Backside power delivery
  • Hybrid bonding
C:\HISTORY\CHAPTERS\09>grep TERMS GLOSSARY.DAT
Gate-all-around (GAA)
A transistor built from stacked horizontal nanosheets fully surrounded by gate material; in volume production from 2022.
Backside power delivery
Routing the power network beneath the transistors through the back of the thinned wafer, freeing front-side metal for signals.
Fabrication
2022–2026
Author: Angus Mackinnon